The Dell CERC SATA 1.5/6ch is a six-channel workstation-class hardware RAID controller, featuring pretty unimpressive but better-than-software RAID performance. It sports an Intel i960 for XOR calculations and 64MB of cache RAM (without battery backup). Dell manage utilities won't install under non-server operating systems. How to manage this controller under, say, Windows XP?
Dell make OEM deals with different manufacturers (typically LSI and Adaptec) for their RAID controllers. Often these adapters have a counterpart in the OEM manufacturer's own lineup, but some, such as the Adaptec-made CERC SATA 1.5/6ch (Adaptec 2610SA), have no direct OEM cousin -- Adaptec's offerings for that adapter being four- and eight-channel instead (Adaptec 2410SA and 2810SA, respectively). As far as I have tested, you can't get hold of Adaptec utilities to manage this controller natively. So, you are left with using the adapter's BIOS control tools (requiring reboots and having no online functionality). Of course, "hot" management from within Windows would be terribly nice.
Install Dell OpenManage Server Administrator 5.5.0 on your Windows XP computer. Earlier versions don't have CERC SATA 1.5/6ch support, and later 6.x versions won't install on XP. Now, as standard, 5.5.0 won't install on XP either, but there is a workaround. Follow this list (-ish):
- Download this package
- Run it. It will unpack the complete installation in a directory of your choice, I used c:\temp\om55
- Run C:\temp\om55\windows\SystemsManagement\SysMgmt.msi OSCHECK=NO
Note! The OSCHECK=NO is paramount to success, or installation will be impossible on XP!
- Answer the prerequisites checking question, of course you have already done that, right!
- When it's done, you are done. Remove the temporary installation files, you don't need anything else.
You might have to do one or both of this too:
- Open port 1311 in your firewall
- If the "DSM SA Connection Service" won't start, you cannot use the software. In that case, go to Administrative Tools/Services in the control panel, find the service, double click, and run it as an account with administrative rights instead of the System account.
If you cannot see the adapter after booting, restart the "DSM SA Data Manager" service and wait until the storage controllers have been detected. You might have to restart "DSM SA Connection Service", too.